CARBON STEEL CS BRANCH CONNECTION OLETS

Carbon Steel (CS) branch connection olets are fittings used in piping systems to create branch connections off of a main pipe. These fittings are typically used to provide a way to attach smaller pipes or equipment to larger pipes. They are made from carbon steel, which is a commonly used material due to its strength and cost-effectiveness.Types of Carbon Steel Branch Connection Olets1. Sockolet:o Description: A type of branch connection fitting that is used to connect a smaller pipe to a larger pipe. It has a socket for the smaller pipe and is welded to the larger pipe.o Applications: Suitable for high-pressure and high-temperature applications.o Standards: Typically conforms to ASME B16.11.2. Thread-olet:o Description: A branch connection fitting with threaded ends that allow it to be screwed onto the main pipe. It is used to create a branch without welding.o Applications: Used in lower-pressure applications where welding is not feasible.o Standards: Typically conforms to ASME B16.11.3. Weldolet:o Description: A type of branch fitting that is welded to the main pipe. It has a reinforced section where the branch pipe is attached.o Applications: Suitable for high-pressure and high-temperature applications.o Standards: Typically conforms to ASME B16.11.4. Flexolet:o Description: A type of branch fitting that allows for the connection of a smaller pipe to a larger pipe at an angle.o Applications: Used in applications where space constraints or alignment issues are present.o Standards: Typically conforms to ASME B16.11.5. Elbolet:o Description: A type of branch fitting that is welded onto the main pipe and provides a branch at an angle.o Applications: Commonly used where the main pipe needs to branch off at a specific angle.o Standards: Typically conforms to ASME B16.11.6. Nipplelet:o Description: A type of branch fitting that includes a short nipple section to connect to the main pipe.o Applications: Used for creating a branch connection with a short length of pipe.o Standards: Typically conforms to ASME B16.11.Specifications and Standards1. ASME B16.11• Description: Standard for forged steel fittings, including olets. Covers dimensions, materials, and pressure ratings.• Pressure Ratings: Class 3000, Class 6000, Class 9000.• Material Specifications: Carbon steel materials such as ASTM A105, ASTM A350 LF2.2. ASTM A1053. ASTM A350 LF2Dimensions and Pressure RatingsCarbon Steel Olets come in various sizes and pressure ratings. Dimensions are typically specified by the nominal pipe size (NPS) and pressure class.• NPS 1/2 to 48 inches: Common sizes for small to medium applications.• Pressure Ratings: Depending on the type of olet, pressure ratings can range from Class 3000 to Class 9000.ApplicationsCarbon steel branch connection olets are used in various industrial applications, including:• Oil and Gas Pipelines: For connecting instrumentation and control lines.• Chemical Processing: For branching connections to chemical feed lines.• Power Plants: For connecting different sections of the piping system.• Water Treatment: For connecting distribution lines.SPECFICATIONS:• Manufacturing Range: DN 15 (1/2”) to DN 1500 (60”)• Rating/Class: 3000#/6000#/9000# and SCH 5/5S/10/10S/20/40/STD/60/80/XS/100/120/140/160/XXS etc.• Dimension Standard: ANSI/ASME B16.11/B16.5/MSS SP97, etc.• Type of Olets (Outlets): Weldolet, Sockolet, Latrolet, Sweepolet, Elbolet, Latroflange, Flangeolet, Nipoflange, Nipolet, Threadolet, etc.• Material Type: CARBON/ALLOY STEEL: ASTM/ASME A105/105N, ASTM / ASME A182, ASTM / ASME A335 GR F1, F5, F9, F11, F12, F22, F23, F91LTCS: ASTM/ASME A350 LF2, ASME/ASTM A694 F42, F46, F52, F60, F65, F70