WATERPROOFING CONTRACTOR IN UAE

Cold self adhesive band based on butyl mastic covered with non-woven. Non woven allows the product to deform. The adhesive side is protected by a film that can be peeled off.

Sealing of wall-floor joints under tiles. The non woven covering adapts to the shape of the support and can be covered by tile adhesive or other coverings or paints. Joints waterproofing. Repair of cracks in cement or fiber cement. The user should test the compatibility of the mastic with the different supports in terms of adhesion and chemical compatibility. Supports must be clean dry and free from dust.

Fast-setting cement-based two-component waterproofing bond. Highly strong and elastic product made specifically for laying and overlapping ceramic floors both outdoors (balconies, swimming pools etc.) and indoors (bathrooms, kitchens etc.) Thanks to its resistance to vertical slip, BOND CEMENT can be used both horizontally and vertically, for example, to bond shower trays and to lay and waterproof bathroom coatings. It does not need reinforcement mesh and is applied in just one coat. BOND CEMENT can be applied on both screeds and pre-existing floors. CLASSIFICATION IN LINE WITH EN 12004 C2TES1 

Paste waterproofing product made of special highly elastic resins and additives resistant to piercing. Highly adhesive and easy to apply. It provides a high-thickness, insulating and protective waterproofing covering in just one coat. Ideal for waterproofing walls backed by soil, foundations and concrete products. It guarantees excellent resistance to bad weather and to ageing.

Based on bitumen and high quality polymers, it is in an aqueous emulsion containing special additives and has very low environmental impact. Ready to use, it has been specifically formulated for creating a waterproof layer and adhesion surface for laying ceramics floors on balconies, shower trays and bath covering. It can be applied easily on both vertical and horizontal surfaces and it is recommended for tiling over existing tiles or cement blocks.

WINGUM PLUS H2O is a coloured waterproofing water-based liquid membrane based on modified resins of high quality and reinforced by synthetic fibers. It assures great resistance to backwater, aging and U.V. rays. It has been formulated also for difficult waterproofing even on big surfaces and to assure great durability. It can be applied on surfaces subject to trampling and on concrete, ceramic, natural stone materials, brickworks, bituminous membranes, fiber-cement, woods, metal sheds also oxidisable and bricks. It’s ideal to waterproof flat and walkable roofs, terraces and balconies made of natural stones or ceramic, for restoration and protection of bituminous membranes. On surfaces subject to strong strains or elastic tensions, or in order to uniform the layer of irregular floors or tiles, it can be reinforced by WIN TECHNO MAT.

Joint cover waterproofing band made of waterproofing thermoplastic copolymer reinforced by non woven fabric. The product assures good adhesion, thanks to its pierced side stripes, and very good elasticity and elongation. It can be used with every cement polymer modified covers and liquid or paste waterproofs of our, that are:

BOND CEMENT

WINFLEX-CEMENT

WINFLEX-CEMENT SUPER

WINGRIP BITUMINOSO

WINGUM PLUS H2O

2021

2025

WINGUM P

WINGUM P ANTIRADICE

Professional mono-component adhesive sealant based on special bitumen and high quality polymers.