Sodium Bisulphite

Item Code: RXSOL-33-1524-025

IMPA Code:550510 is a bio-degradable water based product with excellent efficiency with superior Floor Cleaner, Forward Non-Rinse,General Disinfectant . This product is specially designed for complete emulsification of oil by which subsequent dispersion takes place.

Excellent pre treatment and binder for metal surfaces to be painted. concentrated blend of rxsol proprietory formulated various products, which is specifically designed for the rapid removal of rust, while providing phosphatized ferrous metal surface.3) White Cettol :Item Code: RXSOL-13-1201-050

Extracted natural blend of Neem Oil and Pine oil .A Superior Concentrated Blend of Pine Oil and surfactant, very fast acting & effecting which kills germs throughout the house at the same time and which needs dilution.

4)ORG MC 882 (Membrane Cleaner ) Concentrated alkaline cleaner effective on a wide range of organic foulants Buffered pH to maintain optimum cleaning performance throughout cleaning cycle Liquid cleaner easily diluted to application strength Optimal results when used in a program that includes an acid-based ORG MC 882 product.Application: For use on ultrafiltration (UF) and micro-filtration (MF) membranes Formulated to dissolve organic precipitants from the membrane surface Effective in removing biological slime and bacterial byproduct Can be implemented in a chemically enhanced backwash process to increase system run times. Part No.: RXSOL-33-3324-025.

5)Sodium Hydroxyde Based Alkleen Cleaner RXSOL-19-1425-025 NaOH solution for cleaning of RO and Ultra Filtration (UF) membranes, neutralization of cleaning acid solution and control of pH of potable water

6)ORG Clean MC 103 (Membrane Cleaner) RXSOL-33-3322-025 It is a low pH, liquid formulation designed specifically to remove metal hydroxides, calcium carbonate, and other similiar scales from reverse osmosis (RO), nanofiltration (NF), microfiltration (MF) and ultrafiltration (UF) membranes. This highly effective.

7)REVERSE OSMOSIS MEMBRANE CLEANER RO membrane cleaners is specifically designed to remove iron fouling for silica. It also has effectiveness against calcium carbonate scaling. RXSOL-33-3304-025 performance can be enhanced by adding low / high ph cleaners to the cleaning solution although some minor ph correction may be necessary. It should always be used as recommended by the membrane manufacturer or equipment supplier, in respect to cleaning ph and temperature. it also contains organic dispersants that helps to break down colloidal clay deposits and imparts better efficacy to biocides by penetrating into films. it is specifically developed for removing iron, silica, metal silicates, metal oxides/hydroxides and other colloidal/particulate based foulants from ro membranes. It is also effective to remove calcium carbonate, calcium phosphate and silt.