Our steel shot is exceptionally durable – due to its low friability, the impact of blasting actually further tempers the shot so that its hardness increases over time, allowing the media to deliver consistent, repeatable performance over thousands of cycles. as produced, our steel shot has a hardness of 40-50hrc (390-510 h.v). and thanks to its extremely low breakdown rate, virtually no dust is produced. delivering high-impact energy and fast cleaning rates, steel shot is used to for heavy scouring and to produce very bright finishes steel shot size: s70,s110,s170,s230,s280,s330,s390,s460,s550,s660,s780,s930steel shot diameter: 0.2mm,0.3mm,0.5mm,0.6mm,0.8mm,1.0mm,1.2mm,1.4mm,1.7mm,2.0mm,2.5mm,3.0mm steel shot specificationshape : sphericaldensity : 7.4 g/cm3hardness : 44-48hrc;58-62hrchollow particles : ...
This is shijiazhuang jinmo pipe co.ltd from china.a professional manufacturer of carbon steel seamless butt weld pipe fittings as per astm a234 gr. wpb ansi b16.9,din 2605 and jis b2311 standard. including the following items: 1. butt weld elbow 45degree & 90degree long radius &short radius 2. butt weld straight tees & reducing tees 3. butt weld concentric reducers & eccentric reducers 4. butt weld end caps from 1/2 inch to 72nch 5. butt weld bend 2d 3d, 4d, 5d etc. 6.all kinds of flanges, welding neck , slip on , socket weld , threaded, lap joint, blind, spectacle, orifice, ring and long welding neck flanges.size: 1/2 inch-72 inch wall thickness: sch-5s to sch-xxs material:astm a234-wpb, a420-wpl6/l3 etc.; astm a234- wp12, wp11, wp15, wp22, wp1, wp5, wp9, wp91standard: asme ansi b16.9, jis, din use: petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc.please contact us, if you have enquiry of pipe fittings....
Oil saver rubbers are made from specially formulated compounds which are tough and have a long life. these are molded from a special compound of oil, gas and abrasion-resistant rubber for long service life. we manufacture compatible oil savers to oem such as guiberson and oil states oil saver rubbers manufactured are:h type oil saver rubber - black h type oil saver rubber - blackh type oil saver rubber - blue h type oil saver rubber - blueh type oil saver rubber - green h type oil saver rubber - greenguiberson type htype h 3/8″ – 5/8″ Guiberson type htype h 3/8″ – 5/8″ soft Guiberson type htype h 5/16″ – 7/16″ soft...
Mgo-c brick
Manufacture:
1.use the large crystal、fused magnesia(high-purity magnesia) and high-purity
Graphite as raw materials;
2. make the phenolic resin as the binder, add variety of additives
3. to form by high-pressure and high temperature..
Product features:
1. high refractoriness, excellent anti-oxidation, high strength, perfect thermal
Stability;
2. resist the erosion and spall, high abrasion- resistance strength , perfect ability
Of anti-slag;
3. difficult to oxidation and hydration, can be used for long time.
Product application:
1. used for the furnace wall and working lining of all kinds of furnace;
2. used for the slag line for the ladle and eaf...
MALI YELLOW PAGESONLINE 
