Astec Inc. Manufacturer Of Stainless Steel Pipes In All Grade.we Have Various Range In Steel Pipes.http://www.astecincorp.com/stainless-steel-pipes/...
Steel grit is an angular metallic abrasive produced by crushing bearing steel. steel grit is used for descaling,coating and corrosion removal, and surface etching. the angular particle shape provides a fast cleaning rate and an angular surface profile.steel grit is tempered to three different hardnesses. the hardest material, gh, is designed for use exclusivelyin air blasting equipment,stone cutting. the two softer materials, gl and gp, may also be used in centrifugal wheel blast equipment.steel grit application:steel grit blasting cleaning:steel shot and grit are used in cleaning applications for removal of loose material on metal surfaces. this type of cleaning is common in automotive industry (motor blocks, cylinder heads, etc.).steel grit stone cutting:steel grit is used in cutting hard stones, such as granite. the grit is used in large multi-blade frames which cut the blocks of granite into thin slices. sae j444 sizes:g10 g12 g14 g16 g18 g25 g40 g50 g80 g120steel grit specification:shape : angularhardness :gp:42 ~ 50hrc;gl:56 ~ 60hrc;gh:63 ~ 66hrcdensity : 7.4 g/cm3durability : >3000 timescertificate iso9001,saej444,sgschemical composition:cr 0.60-1.60%c 0.70 -1.20%mn 0.6 -1.20%si 0.40 -1.20%s ...
Cast steel angular grit produced by crushing specially heat treated steel shot its behaviour in service depends聽on hardness - a characteristic readily modified by suitable heat treatment.gp steel grit is used mainly in wheel blast machines for cleaning or preparation work on special surfacesin addition, gl and gh steel grit are equally suitable for use in wheelblast machines and in most cases air聽blast equipment.steel grit application:auto- and manual blasting of metal products (castings, forgings, steel constructions, pipelines);shot-peening of heavy-loaded parts (shafts, carriage springs, springs, cog-wheels) ;surface treatment of stone, granite-, marble- and natural stone-cutting;cleaning of cutting tools;surface preparation of parts for galvanic coatings, enameling;surface preparation of oil and gas pipelines for multi-layer coatings;cleaning of oil-storages and reservoirs sae j444 sizes:g10 g12 g14 g16 g18 g25 g40 g50 g80 g120steel grit specification:shape : angularhardness :gp:42 ~ 50hrc;gl:56 ~ 60hrc;gh:63 ~ 66hrcdensity : 7.4 g/cm3durability : >3000 timescertificate iso9001,saej444,sgschemical composition:cr 0.60-1.60%c 0.70 -1.20%mn 0.6 -1.20%si 0.40 -1.20%s ...
MALI YELLOW PAGESONLINE 
